Multi-Beam Safety Sensor for Door Systems with NO/NC Output & Quick Response

Core Specifications (Detailed Parameter Table)

Key Advantages (Clear, Targeted Points)

1. Multi-Beam Full-Coverage Detection

• 8-beam light grid eliminates safety blind spots across the entire door opening height (1729mm), ensuring no missed detection of small objects, hands, or limbs.
• Dense beam distribution adapts to the dynamic operation of door systems, providing all-around anti-pinch protection.

2. Configurable NO/NC Output

• Default NO output meets standard door control system requirements; NC output is configurable via simple operation.
• Flexible output mode switching allows seamless integration with various door control panels and safety relays, enhancing compatibility.

3. Rapid Response for Door Safety

• Instantly triggers safety actions (door reversal/stopping) upon beam interruption, matching the fast operation of high-speed doors and roller shutters.
• Eliminates safety lags in high-traffic door scenarios, effectively avoiding pinching accidents.

4. Rugged & Reliable Performance

• IP67 protection withstands dust, water splashes, and temporary immersion, suitable for indoor/outdoor door installations and harsh industrial environments.
• Aluminum alloy housing resists corrosion, mechanical wear, and vibration, ensuring long-term stability for frequent door operations.

5. Blanking Mode for False Alarm Prevention

• Blocking the first channel of the light grid does not trigger safety responses, adapting to door gap structures and sequential beam blocking during normal closure.
• Avoids unnecessary door interruptions while retaining full protection against unintended intrusions.

Wiring Guide (Standardized Table with Notes)

Critical Warning

• Do NOT connect NO/NC terminals (Green/Yellow wires of receiver) to the power supply positive terminal—this will permanently damage the optical relay.

NC Output & Blanking Mode Activation Steps

1. Complete wiring according to the Wiring Guide and confirm no connection errors.
2. Power on the sensor (ensure power supply meets DC12-24V requirements).
3. Within 1 minute of power-on, touch the receiver’s Green wire (NO output) to its Black wire (GND) five consecutive times.
4. Observe the receiver’s Red light blinking rapidly—this indicates successful activation: Yellow wire switches to NC mode, and Blanking Mode is enabled.

Application Scenarios (Targeted List)

• Industrial fast doors (manufacturing plants, logistics centers)
• Roller shutter doors (warehouses, retail stores, commercial buildings)
• Automatic doors (office buildings, shopping malls, industrial workshops)
• Cold storage doors (refrigerated warehouses, freezer rooms)
• Garage doors (residential, commercial parking facilities)

Troubleshooting (Comprehensive Problem-Solution Table)

Usage & Maintenance Caveats (Key Reminders)

• Keep connecting cables away from high-voltage/high-current conductors, door machinery, and forklift paths to avoid interference, extrusion, or damage.
• Regularly wipe the emitter and receiver lenses with a dry, soft cloth to remove dust, oil stains, or condensation—dirty lenses will affect detection accuracy.
• Do not bend, twist, or pull the sensor or cables forcefully; avoid scratching the aluminum alloy housing or infrared lenses.
• Prevent direct sunlight or other infrared light sources from shining on the receiver (avoids false triggers or detection failure).
• Ensure the door or obstruction used for Blanking Mode meets the minimum continuous blocking distance requirement.
• Periodically test the anti-pinch function and output mode to ensure the sensor works normally with the door system.